High Pressure Jet Grouting good reputation mechanical equipment price Tianjin-strong high-pressure pump Co., Ltd. The company jet grouting rig and accessories, complete sets of high spray equipment, high-pressure injection pump and fittings, high pressure jet trolley, double-barreled drill Churning Sales pile manufacturers, drill three sets of products, specializing in high-pressure pipe ram services. I needed the project, the high-pressure injection pump, a series of transformation of single and double triple tube Churning pile, mainly to prevent solidification of liquid needed to turn in the pump, after mature technology and testing, production of mature Note special liquid two-fluid injection pump. Mortar pump work should pay attention to the following matters: a stir at any time within the mortar mortar bucket to prevent precipitation. 2. Note the pressure gauge pointer. When the pressure exceeds the limit, you should turn off the power until the pressure is reduced after the start, to avoid causing excessive pressure hose burst. The motor should be installed reliable ground to prevent electric shock. Shield on gray are not free to remove the pump. 4. Always check the gearbox oil jet grouting pile, found oil at the end of small horizontal rotary jet pile dirty, replace them with new oil. 5. The use of the process, when the problem is found, no live maintenance, to prevent accidental injury.