DJM machine restructuring of high pressure jet grouting slurry formulation: water-cement ratio of water to determine the appropriate height and increase the amount of ash under the supervision of Engineer (1.2: 1 each addition of water-cement ratio 360kg, cement 300kg), and and marked on the mixer. The configuration process in strict accordance with the marked increase of gray water height and volume control, followed by sufficient mixing pier ground handling equipment, with a hydrometer to measure the density of the prepared slurry pulp density control, do a test every pot by someone to record water, ash and slurry density data before proceeding slurry feed to meet the requirements. Note: In between mortar mixer and set up a filter hopper railroad residential soft foundation treatment, the slurry was filtered. The prepared slurry can not isolated, the parking time: should be treated according to the waste slurry at the time when the temperature is above 10 ℃ over the following three hours or 10 ℃ more than five hours. Tianjin-strong high-pressure pump Co., Ltd. Tianjin-strong high-pressure pump Co., Ltd. is a company specializing in manufacturing and services by the development, production, sales, consisting of steps. Technical force, with high-quality development and design staff, first-class management, advanced production equipment, complete automated testing system to ensure quality of products, to provide users with high-quality products and quality service. According to my company needs soft ground treatment works on the high-pressure injection pump, a series of reform, mainly to prevent solidification of liquid required to turn in the pump, after mature technology and testing, production of sophisticated special liquid injection Dual fluid injection pump. If interested, please detailed consultation Zhang! Now the project has been put, it is mainly used for fetching water mud and water glass, at the outlet of the bout.